Thursday, May 31, 2018

क्रिकेट में फिक्सिंग के आरोपों की तह तक जाएंगे: रिचर्डसन

कतर स्थित अल जजीरा चैनल ने दावा किया कि भारत, श्रीलंका, ऑस्ट्रेलिया और इंग्लैंड से जुड़े मैचों के दौरान मैच...

from आज तक https://ift.tt/2J4xg4H
via IFTTT

कैराना-नूरपुर पर अखिलेश बोले- हमने BJP को उसी के तरीके से हराया

कैराना लोकसभा सीट पर रालोद उम्मीदवार तबस्सुम हसन और नूरपुर विधानसभा सीट पर सपा उम्मीदवार नईम उल हसन ने जीत...

from आज तक https://ift.tt/2H6nZY2
via IFTTT

Kairana bypoll: Grand alliance wins crucial seat

In Kairana, RLD candidate Tabassum Hasan defeated her nearest rival, BJP's Mriganka Singh by over 55,000 votes. SP candidate Naimul Hasan won in Bijnor's Noorpur by 6,211 votes defeating Avani Singh of BJP, adding to the party's humiliating defeat in bypolls barely a year from general elections.

from Times of India https://ift.tt/2sk3VfZ

A typo that could have cost Rs 18 cr to oil firms



from Times of India https://ift.tt/2IZxP3B

फीफा वर्ल्ड कप: जानिए 1930 से लेकर अब तक के सभी चैंपियंस

सबसे ज्यादा 5 बार चैंपियन का ताज ब्राजील के सिर सजा है, जबकि मौजूदा चैंपियन जर्मनी ने 4 बार इस...

from आज तक https://ift.tt/2H6y1IF
via IFTTT

कैराना: जिन्ना नहीं, गन्ना चला, फेल हुआ मुजफ्फरनगर दंगों पर बंटवारे का दांव

बीजेपी का मजबूत गढ़ नूरपुर ध्वस्त हो गया है, सपा इस सीट पर पहली बार खाता खोलने में कामयाब रही....

from आज तक https://ift.tt/2kDRhVa
via IFTTT

Frank Lampard steps into management at Derby

Former England midfielder Frank Lampard is taking his first step into management by taking the reins at Derby County, the Championship club announced on Thursday.

from Sports News: Cricket News, Latest updates on Tennis, Football, Badminton, WWE Results & more https://ift.tt/2LIldeO

बंगाल में फिर नंबर-2 बनी BJP, 2014 के बाद बदल रहे हालात

महेश्ताला में 22 फीसदी मुस्लिम वोटर होने के बावजूद बीजेपी ने क्षेत्र में अपनी मौजूदगी दर्ज कराने में कामयाबी हासिल...

from आज तक https://ift.tt/2H72W7w
via IFTTT

दिल्ली: रेप का केस वापस नहीं लिया, तो अगवा करके हत्या कर दी

दिल्ली के बदरपुर इलाके के जैतपुर के सोनू हत्याकांड का पुलिस ने खुलासा कर दिया है. सोनू के अपहरण और...

from आज तक https://ift.tt/2kEHEW9
via IFTTT

नहीं रुके बच्चों पर हमले, एनकाउंटर के बाद कुत्तों की नसबंदी

यूपी के सीतापुर में आदमखोर हो जाने के शक में कुत्तों का एनकाउंटर किए जाने के बाद भी बच्चों पर...

from आज तक https://ift.tt/2Jj5t3K
via IFTTT

धूम्रपान के हानिकारक प्रभावों के बारे में बताएगा 'डिजिटल बिलबोर्ड'

यह बिलबोर्ड अगले चार हफ्तों तक रहेगा और यह वीडियो स्मोकर के आसपास खड़े लोगों व स्मोकर को धूम्रपान करने...

from आज तक https://ift.tt/2kBqoB5
via IFTTT

रक्षा सौदे में घूसखोरी पर राहुल बोले- भ्रष्ट 'MODI' अफसरों पर हो एक्शन

कांग्रेस ने गुरुवार को प्रेस कॉन्फ्रेंस कर कहा कि यह काफी गंभीर मसला है और इसके लिए एनडीए सरकार पूरी...

from आज तक https://ift.tt/2IY6FKt
via IFTTT

When victim asked Rajinikanth ‘who are you?’

On Wednesday, a video clip of Tuticorin native Santhosh asking Rajinikanth who he was went viral and subjected the 67-year-old actor to vicious trolling on social media.

from Times of India https://ift.tt/2xDk6KL

INX Media case: Chidambaram gets interim relief



from Times of India https://ift.tt/2xtkOdr

संजू भाई के रोल में रणबीर को देख ऐसा था प्र‍िया दत्त का र‍िएक्शन

संजय दत्त की बायोपिक फिल्म संजू का ट्रेलर वीडियो रिलीज हो गया है. ट्रेलर देखकर उनकी बहन प्र‍िया दत्त ने...

from आज तक https://ift.tt/2J2HCpx
via IFTTT

कैराना: मृगांका ने स्वीकारी हार, कहा- निराश हूं पर हताश नहीं

उन्होंने कहा कि केंद्र और प्रदेश की सरकार के द्वारा बहुत काम हुए हैं लेकिन हम लोगों को समझा नहीं...

from आज तक https://ift.tt/2H8AbXX
via IFTTT

नतीजों से गदगद कांग्रेस ने कहा- ये मोदी सरकार के खात्मे की शुरुआत

गुरुवार दोपहर एक प्रेस कॉन्फ्रेंस में कांग्रेस प्रवक्ता प्रमोद तिवारी ने कहा कि बीजेपी सरकार चार साल की उपलब्धियां बता...

from आज तक https://ift.tt/2IZJDTF
via IFTTT

Befitting reply to BJP drama: Cong on K'taka win



from Times of India https://ift.tt/2xvjxCn

हार पर NDA में फूट! JDU बोली- पेट्रोल कीमतें, सहयोगियों की अनदेखी हार का कारण

केसी त्यागी ने नतीजों के बाद कहा कि पूरे देश में पेट्रोल-डीज़ल की बढ़ती कीमतों के खिलाफ गुस्सा है. इसी...

from आज तक https://ift.tt/2su4QK2
via IFTTT

गूगल मैप में देखिए उपचुनाव के नतीजे, किस सीट का क्या रहा समीकरण

लोकसभा की 4 और विधानसभा की 10 सीटों पर हुए उपचुनाव के नतीजे आ गए हैं. लोकसभा की 4 सीटों...

from आज तक https://ift.tt/2LG9JbX
via IFTTT

रामदेव का चैटिंग ऐप किंभो प्ले स्टोर से घंटे भर में हटाया गया

इलियट ऐल्डर्सन ने किंभो ऐप के बारे मे कुछ कहा है. ये वही शख्स हैं जिन्होंने आधार लीक के बारे...

from आज तक https://ift.tt/2J6F6e8
via IFTTT

टाटा के इतिहास में पहली बार होगा ऐसा, कर्मचारियों की होगी बल्ले-बल्ले

टाटा मोटर्स अपने 150 साल के इतिहास में पहली बार अपने कर्मचारियों के लिए एक खास योजना लेकर आई है.

from आज तक https://ift.tt/2H9wFN4
via IFTTT

जिद मनवाने में कुमारस्वामी सफल, JDS के पास रहेगा वित्त मंत्रालय!

सूत्रों के मुताबिक जेडीएस अपनी बात मनवाते हुए वित्त मंत्रालय अपने पास रखने में कामयाब हो गया है. वहीं कांग्रेस...

from आज तक https://ift.tt/2IXzre1
via IFTTT

विपक्ष नहीं इस बार BJP के सहयोगी दलों ने उठाए EVM पर सवाल

संजय राउत ने कहा कि शिवसेना आखिरी चरण तक लड़ी है और इसी तरह 2019 में भी लड़ेगी. उन्होंने कहा...

from आज तक https://ift.tt/2JeXuEV
via IFTTT

कैराना ने पलटी अजीत सिंह की किस्मत, RLD के आए अच्छे दिन

कैराना लोकसभा सीट पर आरएलडी से विपक्ष की संयुक्त उम्मीदवार तबस्सुम हसन बीजेपी प्रत्याशी मृगांका सिंह पर काफी बढ़त बनाए...

from आज तक https://ift.tt/2LbWcrE
via IFTTT

How to Hang a Mirror

Hanging a mirror is a great way to open up your space and make it look bigger and brighter! Weigh and measure your mirror to determine Once you’ve picked the perfect spot to hang your mirror, it’s time to straighten it up and mark where the hardware will go. Install your hardware and hang the mirror in place, then admire the finished product!

EditSteps

EditChoosing a Location

  1. Stand on a bathroom scale with and without the mirror to calculate its weight. The difference between the 2 numbers is the weight of the mirror. A heavy mirror will weight between , while a lighter mirror will fall between . While both weight categories hang the same way, you’ll need to put more thought and care into anchoring a heavy mirror into the wall.[1]
    Hang a Mirror Step 1 Version 3.jpg
    • If your mirror weighs over , have someone help you with the placing and hanging process.[2]
    • Heavy mirrors need some kind of anchor, such as a stud in the wall, so that will affect where you can place it.
    • Make sure to choose hardware with a high enough weight capacity to hold your mirror!
  2. Choose a room to hang the mirror in. Think about which rooms feel smaller, dark, or more cramped, and could use some brightening up, such as bathrooms or bedrooms. You could also use the mirror as a statement piece in main areas of the house, such as the living room mantel or the dining room.[3]
    Hang a Mirror Step 2 Version 3.jpg
    • Hang a mirror above your mantel for a central statement piece.
    • Display a dramatic mirror in the dining room or entryway to reflect light and open up the space.
    • Add a new mirror to your bathroom to add visual interest.
    • Hang a full-length mirror on your door to conserve space.
  3. Ask someone to help you hold and place the mirror to get the full picture. Have a friend or family member hold the mirror up to the wall while you step back and look. This will help you visualize the finished product and find the exact placement you want. Once you’ve decided on a spot, mark the outline with pencil or masking tape.
    Hang a Mirror Step 3 Version 3.jpg
  4. Make a paper outline of the mirror to easily visualize where to hang it. Use butcher paper or cardboard to trace and cut out the shape of the mirror. Hold the outline up to the wall and use it to visualize how the mirror would look. Adjust it until you find a spot that you like, then use pencil lines or masking tape to mark the placement.[4]
    Hang a Mirror Step 4 Version 3.jpg
  5. Find a stud in the wall to hang a heavy mirror. If your mirror is over , your best bet is to drill into a stud to support the weight. These wooden beams in the walls act as inner supports and will help hold the mirror more solidly than plaster or drywall. To find a stud, use a stud finder tool, knock and listen, or look for indicators like outlets and molding nails.
    Hang a Mirror Step 5 Version 3.jpg
  6. Use a straight-edged board to check the wall for flatness. If the wall is bumpy, it can make a heavy mirror wobble or even break from uneven pressure. Use a long, flat board, such as a yardstick or a straight piece of 1x3 lumber. Slide the board over the wall and note any rocking, which indicates a bump.[5]
    Hang a Mirror Step 6 Version 2.jpg
    • If the wall has too many bumps, mark them in pencil and sand them down gently with medium or coarse sandpaper. To save time, you could also just choose a new place to hang the mirror.

EditMeasuring and Marking the Space

  1. Draw a line on the wall where the bottom of the mirror will go. Once you’ve picked the perfect spot for the mirror, have someone help hold the mirror while you mark its position. Line up a level below the mirror’s bottom edge and make sure it’s straight. Set the mirror down, but keep the level in place as a straightedge. With a pencil, draw a light line along the top of the level indicating the position of mirror’s bottom edge once it’s hung. Make the line as long as the bottom of the mirror.[6]
    Hang a Mirror Step 7 Version 2.jpg
    • Before you draw, tilt the level until the bubbles in the liquid line up perfectly, indicating that the line is perfectly straight.
  2. Keep your level and pencil close by for hanging an unbacked mirror. At this point, you can start installing the hardware for your unbacked mirror. However, you’ll need to keep your measuring and marking supplies handy during the process, so don’t put them away yet!
    Hang a Mirror Step 8 Version 2.jpg
  3. Measure and mark the distance for a backed mirror. Use a tape measure to find the distance between the bottom edge of the mirror and the top edge of a hanging point/hole. With the measuring tape, measure the same distance up from the line you drew on the wall. Draw second line at that height, making sure it’s the same length and parallel to the first.[7]
    Hang a Mirror Step 9 Version 2.jpg
  4. Use a strip of masking tape on a backed mirror with 2 hanging points. Larger mirrors often have 2 hanging points on the back, which can make it difficult to accurately measure and space out the hardware. An easy way to measure is to take a piece of masking tape and lay it horizontally across the 2 hooks on the back of the mirror. Use a pen to mark where the 2 hooks are under the tape, then peel off the tape and place it on your wall, along the second line.[8]
    Hang a Mirror Step 10 Version 2.jpg
    • Once the tape is placed on the wall, you can start installing the hardware. You can keep the tape on the wall while you install, then peel it off once you’re done!
    • If the mirror only has 1 hanging point, measure from the side of the mirror to the center of the hanging point. Measure the same distance on the wall, along the second line. With a pencil, mark where the hanging point will go.

EditHanging an Unbacked Mirror

  1. Use brackets to hang heavy unbacked mirrors. You’ll need 2 J brackets for the bottom, with a cradle wide enough for the thickness of your mirror, and 2 sliding J brackets for the top.[9]
    Hang a Mirror Step 11 Version 2.jpg
  2. Install a row of 3-4 J-hooks along the bottom line drawn on the wall. Use as many hooks as you need to support the mirror’s weight. Evenly space them out and install them with sturdy hollow-wall fasteners for wallboard or plaster, wood screws for wall framing, or masonry anchors if you’re fastening the hooks to brick or concrete.[10]
    Hang a Mirror Step 12 Version 2.jpg
    • You may also want to pad the J-hooks with pieces of felt to protect the back of the mirror.
    • You can also use a single J-shaped metal strip called a J-strip. You should pad this piece as well.
  3. Mark where the sides of mirror will sit on the wall. Use a level and a pencil to draw 2 lines on the wall, indicating the length of the mirror’s sides. They should extend upward, both at a right angle to the bottom horizontal line.[11]
    Hang a Mirror Step 13 Version 2.jpg
  4. Install 2-3 L- or Z-clips along the drawn vertical lines on the wall. Following the same intervals as the bottom J-hooks, loosely attach additional fasteners that will keep the mirror in place. Choose L- or Z-clips based on the mirror’s design, then screw them into the wall. Keep the screw loose so the front side that will rest against the mirror is loose as well.[12]
    Hang a Mirror Step 14 Version 2.jpg
    • Since these clips won’t support the mirror’s weight, you only need light-duty fiber or plastic anchors called wall plugs to install them.
    • Pad the L- and Z-clips with adhesive-backed felt where they’ll touch the glass.
  5. Slide the mirror into place and tighten the clips to keep it secure. Move the side fasteners out of the way before setting the mirror’s bottom edge into the J-hooks. Lift the mirror by the sides and tilt it backward against the wall, then tighten the L- or Z-clips just enough to hold the mirror firmly.[13]
    Hang a Mirror Step 15 Version 2.jpg

EditHanging a Backed/Framed Mirror

  1. Use monkey hooks to hang a heavy mirror if you don’t have any tools. These thin, minimal-damage hooks make it easy to hang a mirror that weighs up to on drywall. They don’t even require any tools to install besides a tape measure and a pencil! Just push and twist the hook to insert it into the wall.[14]
    Hang a Mirror Step 16 Version 2.jpg
    • The best part is that monkey hooks only leave a tiny, nail-sized hole behind, instead of a big anchor hole.[15]
    • If your mirror weighs more than , try upgrading to gorilla hooks. They have the exact same design and installation style, and they can handle up to .
    • These tap-in hooks are perfect for hanging on drywall.
  2. Use plastic wall anchors for a variety of sizes and weight capacities. Although these create a larger hole in the wall than the monkey hooks, they still do less damage than anchor holes and they’re much easier to install. Choose your size and weight capacity based on how large and heavy your mirror is. To install, simply screw the hooks into the wall![16]
    Hang a Mirror Step 17 Version 2.jpg
  3. Use a toggle bolt if you don’t have a wall stud to drill into. Anchoring with a wall stud is the best method, but if you can’t locate a wall stud or it’s not available, toggle bolts are your next best bet.[17] Drill a hole in the wall large enough for the toggle bolt, then thread a machine screw through the toggle bolt nut. Pinch the wings on the toggle bolt flat, then push it into the hole you drilled in the wall. Tighten the bolt with a screwdriver until it hits the back of the wall.[18]
    Hang a Mirror Step 18 Version 2.jpg
    • To finish, hang the mirror’s hooks on the toggle bolt and use a level to make sure everything’s straight.
    • Toggle bolts work best for hanging heavy mirrors on plaster walls.
    • To save time, use a toggle bolt already fitted with a picture-hanging hook.

EditThings You’ll Need

  • Pen
  • Pencil
  • Painter’s tape/masking tape
  • Measuring tape
  • Hardware
  • Drill
  • Butcher paper or cardboard
  • Straight-edged board
  • Medium to coarse sandpaper

EditRelated wikiHows

EditSources and Citations


Cite error: <ref> tags exist, but no <references/> tag was found




from How to of the Day https://ift.tt/2J4iGdi

How to Hang a Mirror How to Hang a Mirror

Hanging a mirror is a great way to open up your space and make it look bigger and brighter! Weigh and measure your mirror to determine Once you’ve picked the perfect spot to hang your mirror, it’s time to straighten it up and mark where the hardware will go. Install your hardware and hang the mirror in place, then admire the finished product!

EditSteps

EditChoosing a Location

  1. Stand on a bathroom scale with and without the mirror to calculate its weight. The difference between the 2 numbers is the weight of the mirror. A heavy mirror will weight between , while a lighter mirror will fall between . While both weight categories hang the same way, you’ll need to put more thought and care into anchoring a heavy mirror into the wall.[1]
    Hang a Mirror Step 1 Version 3.jpg
    • If your mirror weighs over , have someone help you with the placing and hanging process.[2]
    • Heavy mirrors need some kind of anchor, such as a stud in the wall, so that will affect where you can place it.
    • Make sure to choose hardware with a high enough weight capacity to hold your mirror!
  2. Choose a room to hang the mirror in. Think about which rooms feel smaller, dark, or more cramped, and could use some brightening up, such as bathrooms or bedrooms. You could also use the mirror as a statement piece in main areas of the house, such as the living room mantel or the dining room.[3]
    Hang a Mirror Step 2 Version 3.jpg
    • Hang a mirror above your mantel for a central statement piece.
    • Display a dramatic mirror in the dining room or entryway to reflect light and open up the space.
    • Add a new mirror to your bathroom to add visual interest.
    • Hang a full-length mirror on your door to conserve space.
  3. Ask someone to help you hold and place the mirror to get the full picture. Have a friend or family member hold the mirror up to the wall while you step back and look. This will help you visualize the finished product and find the exact placement you want. Once you’ve decided on a spot, mark the outline with pencil or masking tape.
    Hang a Mirror Step 3 Version 3.jpg
  4. Make a paper outline of the mirror to easily visualize where to hang it. Use butcher paper or cardboard to trace and cut out the shape of the mirror. Hold the outline up to the wall and use it to visualize how the mirror would look. Adjust it until you find a spot that you like, then use pencil lines or masking tape to mark the placement.[4]
    Hang a Mirror Step 4 Version 3.jpg
  5. Find a stud in the wall to hang a heavy mirror. If your mirror is over , your best bet is to drill into a stud to support the weight. These wooden beams in the walls act as inner supports and will help hold the mirror more solidly than plaster or drywall. To find a stud, use a stud finder tool, knock and listen, or look for indicators like outlets and molding nails.
    Hang a Mirror Step 5 Version 3.jpg
  6. Use a straight-edged board to check the wall for flatness. If the wall is bumpy, it can make a heavy mirror wobble or even break from uneven pressure. Use a long, flat board, such as a yardstick or a straight piece of 1x3 lumber. Slide the board over the wall and note any rocking, which indicates a bump.[5]
    Hang a Mirror Step 6 Version 2.jpg
    • If the wall has too many bumps, mark them in pencil and sand them down gently with medium or coarse sandpaper. To save time, you could also just choose a new place to hang the mirror.

EditMeasuring and Marking the Space

  1. Draw a line on the wall where the bottom of the mirror will go. Once you’ve picked the perfect spot for the mirror, have someone help hold the mirror while you mark its position. Line up a level below the mirror’s bottom edge and make sure it’s straight. Set the mirror down, but keep the level in place as a straightedge. With a pencil, draw a light line along the top of the level indicating the position of mirror’s bottom edge once it’s hung. Make the line as long as the bottom of the mirror.[6]
    Hang a Mirror Step 7 Version 2.jpg
    • Before you draw, tilt the level until the bubbles in the liquid line up perfectly, indicating that the line is perfectly straight.
  2. Keep your level and pencil close by for hanging an unbacked mirror. At this point, you can start installing the hardware for your unbacked mirror. However, you’ll need to keep your measuring and marking supplies handy during the process, so don’t put them away yet!
    Hang a Mirror Step 8 Version 2.jpg
  3. Measure and mark the distance for a backed mirror. Use a tape measure to find the distance between the bottom edge of the mirror and the top edge of a hanging point/hole. With the measuring tape, measure the same distance up from the line you drew on the wall. Draw second line at that height, making sure it’s the same length and parallel to the first.[7]
    Hang a Mirror Step 9 Version 2.jpg
  4. Use a strip of masking tape on a backed mirror with 2 hanging points. Larger mirrors often have 2 hanging points on the back, which can make it difficult to accurately measure and space out the hardware. An easy way to measure is to take a piece of masking tape and lay it horizontally across the 2 hooks on the back of the mirror. Use a pen to mark where the 2 hooks are under the tape, then peel off the tape and place it on your wall, along the second line.[8]
    Hang a Mirror Step 10 Version 2.jpg
    • Once the tape is placed on the wall, you can start installing the hardware. You can keep the tape on the wall while you install, then peel it off once you’re done!
    • If the mirror only has 1 hanging point, measure from the side of the mirror to the center of the hanging point. Measure the same distance on the wall, along the second line. With a pencil, mark where the hanging point will go.

EditHanging an Unbacked Mirror

  1. Use brackets to hang heavy unbacked mirrors. You’ll need 2 J brackets for the bottom, with a cradle wide enough for the thickness of your mirror, and 2 sliding J brackets for the top.[9]
    Hang a Mirror Step 11 Version 2.jpg
  2. Install a row of 3-4 J-hooks along the bottom line drawn on the wall. Use as many hooks as you need to support the mirror’s weight. Evenly space them out and install them with sturdy hollow-wall fasteners for wallboard or plaster, wood screws for wall framing, or masonry anchors if you’re fastening the hooks to brick or concrete.[10]
    Hang a Mirror Step 12 Version 2.jpg
    • You may also want to pad the J-hooks with pieces of felt to protect the back of the mirror.
    • You can also use a single J-shaped metal strip called a J-strip. You should pad this piece as well.
  3. Mark where the sides of mirror will sit on the wall. Use a level and a pencil to draw 2 lines on the wall, indicating the length of the mirror’s sides. They should extend upward, both at a right angle to the bottom horizontal line.[11]
    Hang a Mirror Step 13 Version 2.jpg
  4. Install 2-3 L- or Z-clips along the drawn vertical lines on the wall. Following the same intervals as the bottom J-hooks, loosely attach additional fasteners that will keep the mirror in place. Choose L- or Z-clips based on the mirror’s design, then screw them into the wall. Keep the screw loose so the front side that will rest against the mirror is loose as well.[12]
    Hang a Mirror Step 14 Version 2.jpg
    • Since these clips won’t support the mirror’s weight, you only need light-duty fiber or plastic anchors called wall plugs to install them.
    • Pad the L- and Z-clips with adhesive-backed felt where they’ll touch the glass.
  5. Slide the mirror into place and tighten the clips to keep it secure. Move the side fasteners out of the way before setting the mirror’s bottom edge into the J-hooks. Lift the mirror by the sides and tilt it backward against the wall, then tighten the L- or Z-clips just enough to hold the mirror firmly.[13]
    Hang a Mirror Step 15 Version 2.jpg

EditHanging a Backed/Framed Mirror

  1. Use monkey hooks to hang a heavy mirror if you don’t have any tools. These thin, minimal-damage hooks make it easy to hang a mirror that weighs up to on drywall. They don’t even require any tools to install besides a tape measure and a pencil! Just push and twist the hook to insert it into the wall.[14]
    Hang a Mirror Step 16 Version 2.jpg
    • The best part is that monkey hooks only leave a tiny, nail-sized hole behind, instead of a big anchor hole.[15]
    • If your mirror weighs more than , try upgrading to gorilla hooks. They have the exact same design and installation style, and they can handle up to .
    • These tap-in hooks are perfect for hanging on drywall.
  2. Use plastic wall anchors for a variety of sizes and weight capacities. Although these create a larger hole in the wall than the monkey hooks, they still do less damage than anchor holes and they’re much easier to install. Choose your size and weight capacity based on how large and heavy your mirror is. To install, simply screw the hooks into the wall![16]
    Hang a Mirror Step 17 Version 2.jpg
  3. Use a toggle bolt if you don’t have a wall stud to drill into. Anchoring with a wall stud is the best method, but if you can’t locate a wall stud or it’s not available, toggle bolts are your next best bet.[17] Drill a hole in the wall large enough for the toggle bolt, then thread a machine screw through the toggle bolt nut. Pinch the wings on the toggle bolt flat, then push it into the hole you drilled in the wall. Tighten the bolt with a screwdriver until it hits the back of the wall.[18]
    Hang a Mirror Step 18 Version 2.jpg
    • To finish, hang the mirror’s hooks on the toggle bolt and use a level to make sure everything’s straight.
    • Toggle bolts work best for hanging heavy mirrors on plaster walls.
    • To save time, use a toggle bolt already fitted with a picture-hanging hook.

EditThings You’ll Need

  • Pen
  • Pencil
  • Painter’s tape/masking tape
  • Measuring tape
  • Hardware
  • Drill
  • Butcher paper or cardboard
  • Straight-edged board
  • Medium to coarse sandpaper

EditRelated wikiHows

EditSources and Citations


Cite error: <ref> tags exist, but no <references/> tag was found




from How to of the Day https://ift.tt/2J4iGdi